北京德华振峡科技有限公司
北京德华振峡科技有限公司
FLZ机床校准显微镜 用于机床导轨的共轴调整和对中心，是机床装配行业内工具之一。
The FLZ alignment tester is a transportable microscope for the alignment of machine guides.Set-up of the measuring instrumentThe measuring wire is fastened to the headstock or a special holding device, fed at the end of the base over a pulley and streched tight with a weight (layout according to DIN 8606).The alignment tester must be placed on the carriage of the machine or a corresponding device, which can be moved in a longitudinal direction in predefined steps on the machine base. The measuring wire must be aligned in such a way that the same values are measured in the starting and end position of the carriage, i.e. that it is tensioned to form an imaginary connecting line parallel to these positions.Technical descriptionThe microscope and the stａnd are connected by a dovetail guide. To bring the measuring wire into focus the microscope can be vertically adjusted by means of a pinion gear on the stand. Horizontally, the position of the microscope is recorded by a digital measuring system and indicated in a LCD display. Since horizontal movement is effected in the object plane, errors of the first order are ruled out. With a spirit level the alignment tester can be precisely installed in a horizontal position. The microscope, spirit level and plane mounting surface, which is provided with two drilled holes for the insertion of the fastening bolts, are aligned to each other. | ||||||||||||||||||||||||||||||||||||||||||||||
 | ||||||||||||||||||||||||||||||||||||||||||||||
 | ||||||||||||||||||||||||||||||||||||||||||||||
 | ||||||||||||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||||||||||
 | ||||||||||||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||||||||||
| ||||||||||||||||||||||||||||||||||||||||||||||
您感兴趣的产品PRODUCTS YOU ARE INTERESTED IN
车铣复合中心 立式车铣复合数控机床 46车铣复合机 多功能车床 车铣复合加工中心
MJ5687 ￥135888
百分零部件网 设计制作，未经允许翻录必究 .
请输入账号
请输入密码
请输验证码
